An IoT fire detection system uses wireless multi-sensor detectors, gateways and a 24-hour monitoring platform to sound a whole-building alarm and alert the Fire Services Department automatically. Eligible older buildings can use it instead of hose reels and a manual fire alarm system.
About the system
What is an IoT fire detection system?
It connects wireless fire detectors, gateways, a monitoring platform and the FSD's communication system. When fire is detected, the building's alarm sounds and the signal is sent to the Fire Services Communications Centre automatically.
How is it different from a stand-alone smoke detector?
A stand-alone detector only alarms inside its own flat. An IoT fire detection system sounds the alarm across the whole building, alerts the FSD through the monitoring platform and keeps checking the status of every detector.
Can BLUTA detect carbon monoxide?
Yes. BLUTA's wireless multi-sensor detectors detect both smoke and carbon monoxide.
If one flat's alarm goes off, will other residents know?
Yes. When any detector or manual call point is triggered, the alarm sounders across the whole building go off together.
Who is alerted in the middle of the night?
The monitoring platform runs 24 hours a day, and fire alarm signals are passed to the Fire Services Communications Centre automatically through CFATS.
Does the on-site alarm stop if the external network fails?
No. Every FireSense Duo detector has a built-in audible and visual alarm (over 85 dB(A) at 3 m) that sounds on site when it detects smoke or carbon monoxide, even without a network connection. Gateways carry two SIM cards on different networks, and the platform monitors whether gateways and detectors are offline.
Installation and regulations
Can my building use it instead of hose reels?
If your building is regulated by the Fire Safety (Buildings) Ordinance (Cap. 572), has six storeys or fewer and was built on or before March 1987, FSD Circular Letter No. 3/2026 accepts an IoT fire detection system plus portable extinguishers instead of hose reel and manual fire alarm systems.
Does installation need major building works?
Usually not. Detectors connect to gateways wirelessly, which reduces cabling in flats and corridors. Gateways need power, and their positions are confirmed during the site survey.
Is there a government subsidy?
Yes. The FSD's alternative solution falls within the Fire Safety Improvement Works Subsidy Scheme. Eligible applicants can receive up to 60% of eligible works and consultancy fees, or the subsidy cap for that building category, whichever is lower.
How much does it cost?
It depends on the number of floors and units, the common areas and site conditions. Send us your building's details and we will give you an initial estimate.
What does BLUTA provide?
One BLUTA team handles the site survey, system design, equipment, 24-hour monitoring platform and after-sales support.
